Steel wire rope fittings is made from steel wire rope and is mainly used for lifting, traction, tension and bearing. Steel wire rope is characterized by high strength, light weight, steady working and not abrupt breaking. It is widely used in steel, chemical, transportation, port and other industries. The variety of steel wire rope used includes galvanized steel wire rope, phosphating steel wire rope, smooth steel wire rope and so on
According to different processing methods, wire rope tools can be divided into three types: wire rope tools; Pressing steel wire rope fittings; Casting steel wire rope; Coil of wire rope without joint. There are mainly the following:
1. One end or two ends are machined in a circular ring by inserting or pressing.
2. Use bus alloy or resin to water and cast rigging.
3. Rigging made by clamping the wire rope with a rope clip.
4. Coil the cable with no joint.
5. As required, the rope can be made into single limb, double limb, triple limb, limb or more limb.
Steel wire rope fittings are divided into 8 types:
1. Steel wire rope laser-rigging (fiber core FC)
2. Press steel wire rope laser-rigging (steel core IWRC)
3. Splicing wire rope lasso (fiber core FC)
4. Splicing wire rope lasso (steel core IWRC)
5. Press the steel wire rope lasso
6. Wire rope roping device for inserting wire rope
7. No joint rope ring (fiber core FC)
8. No joint rope ring (steel core IWRC)
9. Cast steel wire rope fittings. (alloy casting and wire rope resin casting)